We custom design your dive panel so it fit to your needs, all from required Size - Air or Nitrox use, amount of divers, 2 or 3, or 4 divers, Regulatios up to IMCA & NORSOK
Digital depth gauge - Digital pressure gauge form gas bank, we can intergrate all the equipment you need in the panel section.
All dive panels coms with full documentation package up to regulation
Light Diving Craft, for
Safe Air collaborates with Hukkelberg Boats who with over 20 years of experience in the boat industry, Together we manufacture diving systems with uncompromising attention to quality, safety and design. We design custom built diving vessels with the diving system fully integrated into the design of the boat as opposed to being retrofitted onto an existing craft.
onsite production NITROX for surface supplied diving
The fully automatic membrane and CO2 reducer system separate Nitrogen and CO2, to make enriched air Nitrox from 32 to 40% mix with an accuracy less than +/- 0.5 %
Containerized system with: LP compressor - Airdryer - LP filter - CO2 reduer - Membrane unit - HP compressor - HP filter system - Analyser system with log.
for surface supplied diving, Air & NITROX
Cylinders are coated to withstand a submerged environment and is O2 cleaned, come in oxygen service, all components are oxygen compatible with enriched air up to 100% Oxygen
Mounted with cylinder opening in both ends, one for valve and one with end plug / for easy access to the yearling inside inspection.
The Cylinders are certified after EN 12-245 and comes with certificate
Life time is 20 years from date of production
Working pressure 200 bar / Test pressure 300 bar / Min burst pressure 600 bar
From high pressure sensor on the divers first stage, pressure signal are showed on digital display on the dive panel for each diver.
This equipment is not to replace any bailout pressure gauge on the diver, this equipment is an extra feature, so the supervisor can follow the divers bailout pressure and have full control of it
It has a low aleart when the pressure goes below 150 bar.
The helmet hanger fit all stainless steel Kirby Morgan helmets and fit all dive cams and ligts that has small diremeter, differnt POM bracket can be ordret to fit differnt model cams.
Aluminum umbilical Rack can be designed so it fit your dive system and your helmets.
Divers electric heated face plate makes sure that the diver has a clear view all the time during the dive, efficiency during the dive and greater safety for the diver.
Heating under suit or vest, helps diver to keep warm during long dives in cold water.
It is all powered from Battery pack or from surface through the umbilical with 12V DC